Select Your Vehicle
- Acura
- BMW
- 630
- 128 Coupe/Convertible
- 135 Coupe/Convertible
- 135i
- 316ti/318Ti/318Ci/320i
- 318i/318iS
- 318i/318iS/318Ti
- 320/323
- 320/323/325/328
- 320/323/325/330
- 320/323/325/M3
- 323/325/328/330 Sedan/Coupe/Conv./M3
- 325/328/330 Sedan
- 325/330
- 328 Wagon
- 335Ci
- 335i
- 525/528/530/535 Sedan (except 540 V8)
- 525/528/530/540
- 525/528/530/545/550
- 525/530/535
- 525/535
- 725/728/730/735/740/750
- M Roadstar/M Coupe
- M3
- M3 (M3B)
- M3 (M3C)
- M3/M3 CSL
- M5
- Z3
- Z4
- BMW Mini
- Datsun
- Honda
- Hyundai
- Infiniti
- Lexus
- Lotus
- Mazda
- Mitsubishi
- 3000GT
- Galant
- Galant VR-4
- Lancer
- Lancer Evolution I
- Lancer Evolution II
- Lancer Evolution III
- Lancer Evolution IV
- Lancer Evolution V
- Lancer Evolution VI
- Lancer Evolution VII
- Lancer Evolution VIII
- Lancer Evolution VIII MR
- Lancer Evolution IX
- Lancer Evolution IX MR
- Lancer Evolution X
- Lancer Ralliart
- Lancer Sportback
- Lancer Sportback Rallliart
- Outlander
- Outlander Sport
- Starion
- Nissan
- Scion
- Subaru
- Toyota
Cusco Bride Seat 2018 Product Info
Bride Seat Rail Application 2018
Vehicle Results
Results 1 to 200 of 1980 total
per page
List Grid
-
ASN TYPE : SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- ASN/FIA Approved Roll Cage. Certification #: N-5714/5732
- For Non-Sunroof model only.
- WRX, EJ/20/25T
$3,040.00Part Number
692 290 W11
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 7-Point, Front & Rear with Diagonal Bar, 4/5 Passenger, Around Dash-Type
- 4-Door , Non Sunroof model
$1,134.00Part Number
660 261 L
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 7-Point, Front & Rear with Diagonal Bar, 2 Passenger, Dash Through-Type
- For Non-Sunroof models, Applied A-G, and spec C
$1,134.00Part Number
666 265 F
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 6-Point, Front & Rear, 2 Passenger, Dash Through-Type
- For Non-Sunroof model only.
- WRX, EJ/20/25T
$960.00Part Number
692 265 E
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 7-Point, Front & Rear with Diagonal Bar, 2 Passenger, Around Dash-Type
- For Non-Sunroof models, Applied A-G, and spec C
$1,134.00Part Number
666 261 F
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 7-Point, Front & Rear with Diagonal Bar, 2 Passenger, Dash Through-Type
- For Non-Sunroof model only.
- WRX STi model, EJ/20/25T
$1,134.00Part Number
692 265 F
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 7-Point, Front & Rear with Diagonal Bar, 4/5 Passenger, Dash Through-Type
- 4-Door , Non Sunroof model
$1,134.00Part Number
660 265 L
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 6-Point, Front & Rear, 2 Passenger, Dash Through-Type
- For Non-Sunroof models, Applied A-G, and spec C
$960.00Part Number
666 265 E
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 7-Point, Front & Rear with Diagonal Bar, 2 Passenger, Around Dash-Type
- For Non-Sunroof model only.
- WRX, EJ/20/25T
$1,134.00Part Number
692 261 F
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 7-Point, Front & Rear with Diagonal Bar, 2 Passenger, Around Dash-Type
- For Left Hand Drive Model only
- FA20 (2.0L) All model
$1,134.00Part Number
965 261 FLHD
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 6-Point, Front & Rear, 2 Passenger, Around Dash-Type
- 2-Door, Non-Sunroof model, Model D
$960.00Part Number
670 261 E
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 4-Point, Rear, 2 Passenger
- 4-Door , Non Sunroof model
$600.00Part Number
660 261 C
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 4-Point, Rear, 4 Passenger
- For Non-Sunroof models, Applied A-G, and spec C
$600.00Part Number
666 261 A
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 8-Point, Front & Rear with Diagonal & Rear Bar, 2 Passenger, Around Dash-Type
- For Non-Sunroof models, Applied A-G, and spec C
$1,334.00Part Number
666 261 G
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 5-Point, Rear, 2 Passenger with Diagonal Bar
- For Non-Sunroof model only
$774.00Part Number
658 261 D
Position: -$600.00Part Number
692 261 A
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 8-Point, Front & Rear with Diagonal & Rear Bar, 2 Passenger, Around Dash-Type
- For Non-Sunroof model only.
- WRX STi 4-Dr. Sedan model, EJ/20/25T
$1,334.00Part Number
692 261 G
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 12-Point, Front & Rear with Diagonal, Side, Rear Side & Rear Bars, 2 Passenger, Around Dash-Type
- For Non-Sunroof model only.
- WRX STi 4-Dr. Sedan model, EJ/20/25T
$1,560.00Part Number
692 270 W12
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 6-Point, Front & Rear, 4/5 Passenger, Around Dash-Type
- For Non-Sunroof models, Applied A-G, and spec C
$867.00Part Number
666 270 B20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 9-Point, Front & Rear with Diagonal, Side Bars, 2 Passenger, Around Dash-Type
- For Non-Sunroof model only.
- WRX STi model, EJ/20/25T
$1,160.00Part Number
692 270 W9
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 13-Point, Front & Rear with Diagonal, Side, Center Floor, Rear Side & Rear Bars, 2 Passenger, Dash Through-Type
- For Non-Sunroof model only.
- WRX 4-Dr. Sedan model, FA20T
$1,694.00Part Number
6A1 290 W13
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 7-Point, Front & Rear with Diagonal Bar, 2 Passenger, Around Dash-Type
- For Left Hand Drive Model only
- FA20 (2.0L) All model
$1,000.00Part Number
965 270 F20LHD
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 13-Point, Front & Rear with Diagonal, Side, Center Floor, Rear Side & Rear Bars, 2 Passenger, Around Dash-Type
- 2-Door, Non-Sunroof model, Model D
$1,694.00Part Number
670 270 W13
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 7-Point, Front & Rear with Diagonal Bar, 4/5 Passenger, Dash Through-Type
- 2-Door, Non-Sunroof model, Model D
$1,000.00Part Number
670 290 L20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 13-Point, Front & Rear with Diagonal, Side, Center Floor, Rear Side & Rear Bars, 2 Passenger, Dash Through-Type
- For Non-Sunroof model only.
- WRX STi 4-Dr. Sedan model, EJ25T
$1,694.00Part Number
6A1 290 W13
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 7-Point, Front & Rear with Diagonal Bar, 2 Passenger, Dash Through-Type
- FA20 (2.0L) All model
$1,000.00Part Number
965 290 F20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 9-Point, Front & Rear with Diagonal, Side Bars, 2 Passenger, Around Dash-Type
- FA20 (2.0L) All model
$1,160.00Part Number
965 270 W9
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 13-Point, Front & Rear with Diagonal, Side, Center Floor, Rear Side & Rear Bars, 2 Passenger, Around Dash-Type
- For Non-Sunroof model only
$1,694.00Part Number
681 270 W13
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 10-Point, Front & Rear with Diagonal, Side & Rear Bars, 2 Passenger, Around Dash-Type
- For Non-Sunroof model only.
- WRX STi 4-Dr. Sedan model, EJ25T
$1,294.00Part Number
6A1 270 W10
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 12-Point, Front & Rear with Diagonal, Side, Rear Side & Rear Bars, 2 Passenger, Dash Through-Type
- For Non-Sunroof models, Applied A-G, and spec C
$1,560.00Part Number
666 290 W12
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 10-Point, Front & Rear with Diagonal, Side & Rear Bars, 2 Passenger, Around Dash-Type
- For Non-Sunroof model only.
- WRX 4-Dr. Sedan model, FA20T
$1,294.00Part Number
6A1 270 W10
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 6-Point, Front & Rear, 2 Passenger, Dash Through-Type
- 2-Door, Non-Sunroof model, Model E.F.G
$867.00Part Number
671 290 E20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 4-Point, Rear, 2 Passenger
- FA20 (2.0L) All model
$534.00Part Number
965 270 C20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 4-Point, Rear, 4 Passenger
- 2-Door, Non-Sunroof model, Model D
$534.00Part Number
670 270 A20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 4-Point, Rear, 2 Passenger
- For Non-Sunroof model only.
- WRX STi model, EJ/20/25T
$534.00Part Number
692 270 C20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 6-Point, Front & Rear, 2 Passenger, Dash Through-Type
- For Non-Sunroof model only.
- WRX STi 4-Dr. Sedan model, EJ25T
$867.00Part Number
6A1 290 E20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 7-Point, Front & Rear with Diagonal Bar, 2 Passenger, Around Dash-Type
- 2-Door, Non-Sunroof model, Model D
$1,000.00Part Number
670 270 F20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 6-Point, Front & Rear, 2 Passenger, Dash Through-Type
- For Non-Sunroof model only.
- WRX 4-Dr. Sedan model, FA20T
$867.00Part Number
6A1 290 E20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 5-Point, Rear, 2 Passenger with Diagonal Bar
- For Non-Sunroof model only.
- WRX STi 4-Dr. Sedan model, EJ/20/25T
$667.00Part Number
692 270 D20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 12-Point, Front & Rear with Diagonal, Side, Rear Side & Rear Bars, 2 Passenger, Dash Through-Type
- 2-Door, Non-Sunroof model, Model E.F.G
$1,560.00Part Number
671 290 W12
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 5-Point, Rear, 4/5 Passenger with Rear Roof Bar
- For Non-Sunroof model only.
- WRX STi model, EJ/20/25T
$667.00Part Number
692 270 K20
Position: - -
Acceleration Pedal Attachment
- Add-on Type. Bolt-on. Polished Stainless Steel
- Giving extended length & area for easier Heel & Toe operation
- FA20 (2.0L) All model
$51.00Part Number
965 766 A
Position: -$507.00Part Number
965 800 ARS
Position: -Hand Brake Knob, Blue
- Drift Knob, Billet Aluminum. For Subaru (BRZ, GRB, GVB, GDA, GDB (Applied C-G), Scion FR-S only
- WRX STi 4-Dr. Sedan model, EJ25T
$27.00Part Number
692 014 AL
Position: -Mud Flaps
- Mounts on outside of fender.
- Needs to drill 4 holes on outer fender panel on each side.
- All models (Applied A, B, E &F only)
$160.00Part Number
666 841 FAR
Position: RearMud Flaps
- Mounts on inside of fender.
- Needs to drill holes on inner tire housing body on each side.
$160.00Part Number
660 841 AR
Position: RearRear Diffuser
- Bolt, Rear Diffuser Panel, Subaru Genuine part. Require to order x4 bolts per panel separately.
- All models (Applied A-G)
$1.80Part Number
ST90110-0365
Position: Rear$131.00Part Number
687 017 F
Position: Front -
Electronic Dampening Force Controller
- E-Con2 G-Sensor
- For Street Spec-A E-Con2
- Optional Item
- WRX, EJ/20/25T
$131.00Part Number
00B 60J G
Position: -Electronic Dampening Force Controller
- E-Con2 G-Sensor
- For Street Spec-A E-Con2
- Optional Item
- All model
$131.00Part Number
00B 60J G
Position: -Electronic Dampening Force Controller
- E-Con2 G-Sensor
- Use with E-CON2 System
- Optional
- FA20 (2.0L) All model
$131.00Part Number
00B 60J G
Position: - -
$32.00Part Number
010 002 M01
Position: -High Performance Clutch Components
- Metal clutch disc
- OE Replacement Type
- FA20 (2.0L) All model
$438.00Part Number
00C 022 C666F
Position: -High Performance Clutch Components
- Thin metal clutch disc
- OD 230mm OD, Spline 25.2, # of teeth 24
- EJ20T (Applied D, E, F & G model)
$428.00Part Number
660 022 CN
Position: -$835.00Part Number
660 022 G
Position: -High Performance Clutch Components
- Copper clutch disc
- 225mm OD, Spline 25.2, # of teeth 24
- EJ20T (Applied A, B & C model)
$386.00Part Number
00C 022 R660
Position: -High Performance Clutch Components
- Metal clutch disc
- OD 230mm OD, Spline 25.2, # of teeth 24
- EJ20T
$428.00Part Number
00C 022 C666F
Position: -$386.00Part Number
00C 022 R660N
Position: -High Performance Clutch Components
- Copper clutch disc
- OD 230mm OD, Spline 25.2, # of teeth 24
- EJ20T
$386.00Part Number
00C 022 R660N
Position: -$386.00Part Number
00C 022 R660N
Position: -$835.00Part Number
660 022 G
Position: -High Performance Clutch Components
- Metal clutch set
- Metal disc & reinforce clutch cover
- WRX STi 4-Dr. Sedan model, EJ/20/25T
$798.00Part Number
667 022 G
Position: -High Performance Clutch Components
- Metal clutch set
- Metal disc & reinforce clutch cover
- 2.5L EJ25
$835.00Part Number
666 022 G
Position: -$1,320.00Part Number
HBD 183 A
Position: Rear$1,520.00Part Number
HBD 684 A
Position: Rear$1,320.00Part Number
HBD 183 A
Position: Rear$1,520.00Part Number
LSD 684 K15
Position: RearLSD Type-MZ
- 2.0 Way (45/45)
- Use with Final Gear set 4.875 & 5.125 ratio as set
- FA20 (2.0L) All model
$1,507.00Part Number
LSD 987 E2
Position: Rear$1,320.00Part Number
LSD 181 A
Position: Rear$1,400.00Part Number
LSD 180 B15
Position: Front$1,347.00Part Number
LSD 182 K2
Position: Rear$1,347.00Part Number
LSD 183 K15
Position: Rear$1,507.00Part Number
LSD 986 KT2
Position: RearLSD Type-MZ
- 1 way (1 & 2 way)
- Competition (higher initial torque) Type available on request
- WRX/WRX-RA Applied D (Center Viscous), MT, OEM Diff : Viscous, EJ20T
$1,320.00Part Number
LSD 181 A
Position: Rear$1,400.00Part Number
LSD 184 B
Position: Front$1,520.00Part Number
LSD 684 K2
Position: Rear$1,347.00Part Number
LSD 183 A
Position: RearLSD Type-MZ
- 2 way (1 & 2 way)
- WRX/WRX-RA Applied F/G (Center Viscous), MT, OEM Diff : SURETRAC, EJ20T
$1,347.00Part Number
LSD 183 A2
Position: RearLSD Type-MZ
- 1.5way(1&1.5way)
- Require to exchange original side shafts to Nissan Genuine P/N 38415AA100 x2 pcs. & Snap-Ring P/N 805028011 x 2pcs. for the car with OE HELICAL LSD after Jan 1998 production models
- Sti Ver.4 WRX-RA Applied E (Center DCCD), MT, OEM Diff : OPEN/HELICAL, EJ20T
$1,400.00Part Number
LSD 180 B15
Position: Front$1,507.00Part Number
LSD 986 K15
Position: RearLSD Type-MZ
- 1.5 way (1.5 & 2 way)
- Sti Ver.5/6 WRX-RA Applied F/G (Center DCCD), MT, OEM Diff : MECHANICAL Type, EJ20T
$1,347.00Part Number
LSD 182 K15
Position: Rear$1,400.00Part Number
LSD 184 A
Position: Front$1,880.00Part Number
LSD 184 S
Position: Front$1,400.00Part Number
LSD 180 B15
Position: Front$1,520.00Part Number
LSD 684 K2
Position: Rear$1,347.00Part Number
LSD 182 A2
Position: Rear$1,347.00Part Number
LSD 182 K2
Position: Rear$1,347.00Part Number
LSD 182 A
Position: Rear$1,400.00Part Number
LSD 183 L2
Position: RearLSD Type-RS
- 2 way (1.5 & 2 way)
- 5AT, OEM Diff : Viscous, EJ20T, not apply for the car with the VDC(traction control)
$1,547.00Part Number
LSD 684 L2
Position: Rear$1,400.00Part Number
LSD 180 C
Position: Front$1,400.00Part Number
LSD 182 F2
Position: Rear$1,400.00Part Number
LSD 184 F
Position: Front$1,374.00Part Number
LSD 181 F
Position: Rear$1,400.00Part Number
LSD 182 F2
Position: Rear$1,547.00Part Number
LSD 684 L2
Position: RearLSD Type-RS
- 2 way (1.5 & 2 way)
- Sti Ver.1/2 WRX-RA (Center DCCD), MT, OEM Diff : Viscous/MECNANICAL Type, EJ20T
$1,374.00Part Number
LSD 181 L2
Position: Rear$1,400.00Part Number
LSD 183 F
Position: RearLSD Type-RS
- 1 way only: Use for Competition (Gymkhana), 55/0 deg.
- Sti Ver.4 WRX-RA Applied E (Center DCCD), MT, OEM Diff : MECHANICAL Type, EJ20T
$1,400.00Part Number
LSD 182 FG
Position: Rear$1,400.00Part Number
LSD 183 F
Position: Rear$1,520.00Part Number
LSD 986 L15
Position: Rear$1,400.00Part Number
LSD 180 C15
Position: FrontLSD Type-RS
- 1 way only: Use for Competition (Gymkhana), 55/0 deg.
- WRX STi 4-Dr. Sedan model, EJ25T
$1,400.00Part Number
LSD 182 FG
Position: RearLSD Type-RS
- 1 way (1 & 2 way)
- Sti Ver.5/6 WRX-RA Applied F/G (Center DCCD), MT, OEM Diff : MECHANICAL Type, EJ20T
$1,400.00Part Number
LSD 182 F
Position: RearLSD Type-RS
- 1.5 way (1.5 & 2 way)
- MT/AT, OEM Diff : Viscous, EJ20T, not apply for the car with the VDC(traction control)
$1,400.00Part Number
LSD 183 L15
Position: RearLSD Type-RS
- 1.5way(1&1.5way)
- Require to exchange original side shafts to Nissan Genuine P/N 38415AA100 x2 pcs. & Snap-Ring P/N 805028011 x 2pcs. for the car with OE HELICAL LSD after Jan 1998 production models
- WRX/WRX-RA Applied F/G (Center Viscous), MT, OEM Diff : OPEN/HELICAL, EJ20T
$1,400.00Part Number
LSD 180 C15
Position: Front$1,400.00Part Number
LSD 182 L2
Position: Rear$1,547.00Part Number
LSD 684 F2
Position: Rear$1,400.00Part Number
LSD 183 F2
Position: Rear$1,400.00Part Number
LSD 182 FG
Position: RearLSD Type-RS
- 2 way (1 & 2 way)
- 5AT, OEM Diff : Viscous, EJ20T, not apply for the car with the VDC(traction control)
$1,547.00Part Number
LSD 684 F2
Position: RearLSD Type-RS
- 1 way (1 & 2 way)
- Require to exchange original side shafts to Nissan Genuine P/N 38415AA100 x2 pcs. & Snap-Ring P/N 805028011 x 2pcs. for the car with OE HELICAL LSD after Jan 1998 production models
- Applied A-G, MT, OEM Diff : OPEN/HELICAL, EJ20T
$1,400.00Part Number
LSD 180 F
Position: Front$1,547.00Part Number
LSD 684 F
Position: RearLSD Type-RS
- 1 way (1 & 2 way)
- Sti Ver.3 WRX-RA Applied D (Center DCCD), MT, OEM Diff : OPEN, EJ20T
$1,400.00Part Number
LSD 180 F
Position: Front$1,880.00Part Number
LSD 184 R
Position: Front$1,547.00Part Number
LSD 684 L15
Position: RearRear Member Collar
- Support Rear Suspension Member, Set of 4
- Bolt-on
- Aluminum, Blue
- FA20 (2.0L) All model
$334.00Part Number
965 927 A
Position: RearSingle Plate Clutch System
- Pull Type clutch system
- Clamp Load: 11800N-m
- Release Bearing available P/N 660 BRG602 : $96.00. SST is available : P/N 00C SST 660 : $60.00
- EJ20T, Applied F&G is not suitable.
$1,799.00Part Number
660 022 HP
Position: EngineSingle Plate Clutch System
- Pull Type clutch system
- Clamp Load: 11800N-m
- Release Bearing available P/N 660 BRG602 : $96.00. SST is available : P/N 00C SST 660 : $60.00
- EJ20T
$1,799.00Part Number
660 022 HP
Position: EngineTransmission Gear Set
- DOG Mission Conversion Kit, 1st - 5th, Standard
- Use OE Final Gear, Can be used for 6-Speed Transmission Case
- FIA Approved: N-5621, N-5650, N-5656, N-5676, N5695, N-5741, N-5732, N-5738
- Applied A-G including
$8,000.00Part Number
667 028 A
Position: -Transmission Gear Set
- Close Gear Ratio Set, 1st, 2nd + Counter Shaft
- 1st: 2.946, 2nd: 2.011 (vs. OE 1st: 3.626, 2nd: 2.188, 3rd: 1.541, 4th: 1.213, 5th: 1.000, 6th: 0.767)
- Final Gear Ratio: 4.100
- FA20 (2.0L) All model
$2,640.00Part Number
965 028 ATwin Plate Clutch System
- Twin Copper Clutch System
- Pull-Type, 200mm, Clamping Force 10800N
- EJ20T
$2,640.00Part Number
667 022 CP
Position: Engine -
$80.00Part Number
684 561 AN
Position: Front$131.00Part Number
6A1 561 ALHD
Position: Front$80.00Part Number
692 561 A
Position: FrontStrut Tower Mount Bracket w/BCS
- For RHD model only. Can be used with Type-OS Bar only. Blue
- For Applied C-D models
$80.00Part Number
667 54B AL
Position: Front$240.00Part Number
658 526 A
Position: Rear$240.00Part Number
660 526 A
Position: RearType 40
- Aluminum/40mm OD Round
- Require to trim rear panels to install
- All models (Applied A-G)
$240.00Part Number
666 526 A
Position: Rear$240.00Part Number
660 526 A
Position: Rear$240.00Part Number
684 535 A
Position: FrontType ALC OS
- Aluminum/Oval with Carbon Film Wrapped
- Require to trim rear panels to install
- AWD 2000ccT
$240.00Part Number
680 536 A
Position: RearType AS
- Aluminum/20mm OD, Round
- Require to trim rear panels to install
- AWD 2000ccT applied A?B
$160.00Part Number
666 511 A
Position: Rear$160.00Part Number
666 511 A
Position: Rear$160.00Part Number
684 510 A
Position: Front$160.00Part Number
659 511 A
Position: Rear$240.00Part Number
687 542 A
Position: Front$240.00Part Number
687 542 A
Position: Front$200.00Part Number
667 540 A
Position: Front$200.00Part Number
684 541 AN
Position: Rear$200.00Part Number
687 540 A
Position: Front$200.00Part Number
680 540 A
Position: Front$200.00Part Number
687 540 A
Position: FrontType OS
- Aluminum, Oval Shape Bar
- Require to trim rear panels to install
- All models (Applied A-G)
$200.00Part Number
666 541 A
Position: Rear$200.00Part Number
687 540 A
Position: Front$200.00Part Number
666 541 A
Position: RearType OS w/BCS
- Aluminum, Oval Shape Bar w/Brake Master Cylinder Stopper, RHD model only
- AWD 2000ccT Applied C-D (includes Spec C), RHD model
$267.00Part Number
667 540 AM
Position: FrontType OS w/BCS
- Aluminum, Oval Shape Bar w/Brake Master Cylinder Stopper, RHD model only
- AWD 2000ccT, 280ps,model/Oct 1996 or later
$267.00Part Number
660 540 AM
Position: FrontType OS w/BCS
- Aluminum, Oval Shape Bar w/Brake Master Cylinder Stopper, RHD model only
- All models (RHD model only)
$267.00Part Number
660 540 AM
Position: FrontType OS w/BCS
- Aluminum, Oval Shape Bar w/Brake Master Cylinder Stopper, RHD model only
- AWD 2000ccT
$267.00Part Number
680 540 AM
Position: FrontType Rear Cross
- Steel, Oval Shape Bar
- Require to trim rear panels to install
- WRX 4-Dr. Sedan model, FA20T
$307.00Part Number
6A1 541 AX
Position: Rear -
Lower Arm Bar
- Lower Arm Bar - Ver.1
- Cannot be used with Lower Arm Bar - Ver.2 as set
- All models (Applied A-G) except Applied B model
$100.00Part Number
666 475 A
Position: FrontLower Arm Bar
- Lower Arm Bar - Ver.1
- Cannot be used with Lower Arm Bar - Ver.2 as set
- AWD 2000ccT, AT model is suitable, NA model is not suitable
$100.00Part Number
660 475 A
Position: FrontLower Arm Bar
- Lower Arm Bar - Ver.2
- Cannot be used with Lower Arm Bar - Ver.1 as set, Not for N/A model
- WRX, EJ/20/25T
$200.00Part Number
692 477 A
Position: FrontLower Arm Bar
- Lower Arm Bar - Ver.1
- Cannot be used with Lower Arm Bar - Ver.2 as set
- WRX Sti model, EJ/20/25T
$160.00Part Number
692 475 A
Position: FrontLower Arm Bar
- Lower Arm Bar - Ver.2
- Cannot be used with Lower Arm Bar - Ver.1 as set
- AWD 2000ccT, NA model is not suitable, AT model is suitable
$200.00Part Number
660 477 A
Position: FrontLower Arm Bar
- Lower Arm Bar - Ver.1
- Cannot be used with Lower Arm Bar - Ver.2 as set
- AWD 2000ccT, ABS model is suitable, NA model is not suitable
$100.00Part Number
660 475 A
Position: Front$167.00Part Number
684 492 RS
Position: RearPower Brace
- Floor, Rear
- Requires minor under cover modification for A-Line
- All models (Applied A-G)
$167.00Part Number
672 492 R
Position: RearPower Brace
- Rear frame bar
- Standard diffuser(for Impreza WRC GDB, applied F) is needed Stay 680 487 S(\3,800 excl.tax) separately
- AWD 2000ccT
$160.00Part Number
680 487 A
Position: RearPower Brace
- Rear Trunk, LHD model only
- Requires cutting trunk inside cover
- Applied F/G, LHD model
$227.00Part Number
672 492 RTLHD
Position: Rear$227.00Part Number
6A1 492 RE
Position: RearPower Brace
- Steering Rack Stay, reinforced, LHD
- OE Replacement Type, Bolt-on
- turbo model, with VDC model is suitable
$67.00Part Number
692 026 ALHD
Position: Front$114.00Part Number
687 492 RM
Position: Rear -
Bushing Kit
- Rear Sway Bar Linkage - Rear
- Arm side
- Come with rubber boots
- WRX Sti model, EJ/20/25T
$214.00Part Number
692 464 SV
Position: RearBushing Kit
- Front Lower Arm Bushings / Pillowball Type
- Front-Side
- Come with Dust Rubber Boots
- Applied B spec C only
$240.00Part Number
660 464 BV
Position: Front$240.00Part Number
692 464 JV
Position: RearBushing Kit
- Rear Trailing Arm Bushings / Pillowball Type
- Come with Dust Rubber Boots
- All model
$227.00Part Number
660 464 EV
Position: RearBushing Kit
- Front Lower arm bushes / Pillow ball Type
- Rear side
- Come with rubber boots
- WRX Sti model, EJ/20/25T
$560.00Part Number
692 464 CV
Position: Front$67.00Part Number
00B 628 A
Position: Rear$80.00Part Number
684 316 A
Position: -$80.00Part Number
684 316 B
Position: -Pillowball Upper Mounts
- Camber Adjustable Type
- Select Pillow Nut on order, H4 or BG5. Ride height +10mm raised.
- Comes with Pillow Nut: H4 (M12x1.25mm, Depth 10mm) or BG5 (M14x1.5mm), Collar:35 Type
- -
$320.00Part Number
658 410 A
Position: FrontPillowball Upper Mounts
- Camber Adjustable Type
- Can be used with coilover straight Type spring only. Not for OE spring. Require to order upper spring seat separately.
- Comes with Pillow Nut: I (M12x1.25mm), Collar:01. Check M12x1.25 or M14x1.5mm before order.
- -
$320.00Part Number
658 420 A
Position: RearPillowball Upper Mounts
- Camber Adjustable Type
- Can be used with OE spring. Require to order upper spring seat separately to use with coilover straight Type spring.
- Select Pillow Nut and Collar from Reference Guide in PDF on order.
- WRX, EJ/20/25T
$320.00Part Number
692 410 A
Position: FrontRods, Arms, Links
- Rear Trailing Rod with Pillowball Rod End
- Center Turn Buckle Adjustable range:+10 / -10mm for Caster Adjustment
- Turbo, AT
$467.00Part Number
692 474 T
Position: RearRods, Arms, Links
- Rear Trailing Rod with Pillowball Rod End
- Center Turn Buckle Adjustable range:+10 / -10mm for Caster Adjustment
- WRX STi 4-Dr. Sedan model, EJ25T
$467.00Part Number
965 474 T
Position: RearRods, Arms, Links
- Rear Lateral Link/Control Arm, Pillowball Rod End
- Adjustable Camber Range:+12 / -12mm
- WRX Sti model, EJ/20/25T
$574.00Part Number
692 474 L
Position: RearRods, Arms, Links
- Rear Lateral Link, Pillow Ball Type (Rear side)
- Adjustable range:+15 / -5mm
- Applied E,F,G models only
$734.00Part Number
672 474 LB
Position: RearRods, Arms, Links
- Rear Trailing Rod with Pillowball Rod End
- Center Turn Buckle Adjustable range:+10 / -10mm for Caster Adjustment
- -
$560.00Part Number
666 474 T
Position: RearRods, Arms, Links
- Rear Trailing Rod with Pillowball Rod End
- Center Turn Buckle Adjustable range:+12 / -12mm for Caster Adjustment
- AWD 2.0L (FB20)
$467.00Part Number
965 474 T
Position: RearRods, Arms, Links
- Rear Lateral Link/Control Arm, Pillowball Rod End
- Adjustable Camber Range:+12 / -12mm
- WRX STi 4-Dr. Sedan model, EJ/20/25T
$574.00Part Number
692 474 L
Position: RearRods, Arms, Links
- Rear Lateral Link (rear side), Pillowball Rod End
- WRX 4-Dr. Sedan model, FA20T
$574.00Part Number
6A1 474 L
Position: Rear$240.00Part Number
667 311 A22
Position: Front$240.00Part Number
684 311 B21
Position: Rear$347.00Part Number
689 311 A26
Position: FrontSway Bar
- Solid 20mm 197% compare to standard (16mm)
- With Bushings
- Installation: approx. 1.0H
- AWD 2500ccT, Turbo & AT model only
$280.00Part Number
692 311 B20
Position: Rear$267.00Part Number
686 311 A23
Position: FrontSway Bar
- 19mm 3-ways Adjustable 146 / 173 / 206% compare to standard
- With Bushings, some of model are using standard bush
- AWD 2000cc.T
$240.00Part Number
658 311 BJ19
Position: RearSway Bar End Link
- Rear Sway Bar Linkage / Pillow Ball Type
- Fixed length. Non-Adjustable
- turbo model, applied A-D
$160.00Part Number
684 317 A
Position: Rear -
Battery Tie Down
- Billet Aluminum, Anodized in Blue with CUSCO logo
- Can be used with OE Battery
- L=172mm
- FA20 (2.0L) All model
$78.00Part Number
00B 745 B
Position: -$200.00Part Number
965 727 ALHD
Position: Engine$240.00Part Number
965 005 R05
Position: -$24.00Part Number
00B 001 ND03
Position: EngineOther Parts
- Engine Oil Cooler Kit, Bolt-on. Can be used for both 6-Speed MT & AT models.
- Water cooled system. 7-Layer Cores with 4000 Kcal High Volume Heat Exchanger.
- Kit comes with Oil Cooler unit, Hoses, Base mount, Clamps, Connectors.
- WRX 4-Dr. Sedan model, FA20T
$774.00Part Number
6A5 012 A
Position: EngineTurbo Heat Shield
- For EJ20T. T=1.2mm Stainless Steel. Bolt-on.
- Kit comes with stainless bolts.
- AWD 2000cc.T
$91.00Part Number
681 045 A
Position: EngineTurbo Heat Shield
- For EJ20T. T=1.2mm Stainless Steel. Bolt-on.
- Kit comes with stainless bolts.
- AWD 2000cc.T applied A-D
$91.00Part Number
684 045 A
Position: Engine
Results 1 to 200 of 1980 total
per page
List Grid
