Select Your Vehicle
- Acura
- BMW
- 630
- 128 Coupe/Convertible
- 135 Coupe/Convertible
- 135i
- 316ti/318Ti/318Ci/320i
- 318i/318iS
- 318i/318iS/318Ti
- 320/323
- 320/323/325/328
- 320/323/325/330
- 320/323/325/M3
- 323/325/328/330 Sedan/Coupe/Conv./M3
- 325/328/330 Sedan
- 325/330
- 328 Wagon
- 335Ci
- 335i
- 525/528/530/535 Sedan (except 540 V8)
- 525/528/530/540
- 525/528/530/545/550
- 525/530/535
- 525/535
- 725/728/730/735/740/750
- M Roadstar/M Coupe
- M3
- M3 (M3B)
- M3 (M3C)
- M3/M3 CSL
- M5
- Z3
- Z4
- BMW Mini
- Datsun
- Honda
- Hyundai
- Infiniti
- Lexus
- Lotus
- Mazda
- Mitsubishi
- 3000GT
- Galant
- Galant VR-4
- Lancer
- Lancer Evolution I
- Lancer Evolution II
- Lancer Evolution III
- Lancer Evolution IV
- Lancer Evolution V
- Lancer Evolution VI
- Lancer Evolution VII
- Lancer Evolution VIII
- Lancer Evolution VIII MR
- Lancer Evolution IX
- Lancer Evolution IX MR
- Lancer Evolution X
- Lancer Ralliart
- Lancer Sportback
- Lancer Sportback Rallliart
- Outlander
- Outlander Sport
- Starion
- Nissan
- Scion
- Subaru
- Toyota
Cusco Bride Seat 2018 Product Info
Bride Seat Rail Application 2018
Vehicle Results
Results 1 to 200 of 8273 total
per page
List Grid
-
$600.00Part Number
153 261 CS
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 6-Point, Front & Rear, 2 Passenger, Dash Through-Type
- For Non-Sunroof model only
$960.00Part Number
223 265 E
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 4-Point, Front, 2 Passenger, Around Dash-Type
- F20C, 2000cc
$854.00Part Number
381 261 H
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 7-Point, Front & Rear with Diagonal Bar, 2 Passenger, Around Dash-Type
- For Sunroof model only
$1,134.00Part Number
163 261 FS
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 7-Point, Front & Rear with Diagonal Bar, 4/5 Passenger, Around Dash-Type
- For Non-Sunroof model only
$1,134.00Part Number
564 261 L
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 5-Point, Rear, 5 Passenger with Rear Roof Bar
- For Non-Sunroof model only.
- WRX STi model, EJ/20/25T
$774.00Part Number
692 261 K
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 7-Point, Front & Rear with Diagonal Bar, 2 Passenger, Around Dash-Type
- For Sunroof model only
$1,134.00Part Number
153 261 FS
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 6-Point, Front & Rear, 2 Passenger, Dash Through-Type
- 2-Door, Non-Sunroof model, Model E.F.G
$960.00Part Number
671 265 E
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 6-Point, Front & Rear, 2 Passenger, Dash Through-Type
- For Hard Top model only
$960.00Part Number
404 265 EHT
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 7-Point, Front & Rear with Diagonal Bar, 2 Passenger, Dash Through-Type
- For Non-Sunroof model only
$1,134.00Part Number
152 265 F
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 6-Point, Front & Rear, 2 Passenger, Around Dash-Type
- FA20 (2.0L) All model
$960.00Part Number
965 261 E
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 6-Point, Front & Rear, 2 Passenger, Dash Through-Type
- For Non-Sunroof model only
$960.00Part Number
564 265 E
Position: -D1 Roll cage
- Chromoly 40mm OD, CUSCO Blue
- 7-Point, Front & Rear with Diagonal Bar, 4/5 Passenger, Dash Through-Type
- All models except Sunroof model
$1,134.00Part Number
114 265 L
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 13-Point, Front & Rear with Diagonal, Side, Center Floor, Rear Side & Rear Bars, 2 Passenger, Around Dash-Type
- For Non-Sunroof model only
$1,694.00Part Number
422 270 W13
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 13-Point, Front & Rear with Diagonal, Side, Center Floor, Rear Side & Rear Bars, 2 Passenger, Dash Through-Type
- For Non-Sunroof model only
$1,694.00Part Number
564 290 W13
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 12-Point, Front & Rear with Diagonal, Side, Rear Side & Rear Bars, 2 Passenger, Dash Through-Type
- For Non-Sunroof model only
$1,560.00Part Number
564 290 W12
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 6-Point, Front & Rear, 2 Passenger, Around Dash-Type
- For Sunroof model only
$867.00Part Number
163 270 ES20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 5-Point, Rear, 2 Passenger with Diagonal Bar
- All models
$667.00Part Number
BM0 270 D20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- Front Strut Support Bar for 965 290 W. Needs Welding
- Use With 956 290 W Only (Weld In)
- FA20 (2.0L) All model
$294.00Part Number
965 290 RA
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 13-Point, Front & Rear with Diagonal, Side, Center Floor, Rear Side & Rear Bars, 2 Passenger, Dash Through-Type
- All models except Sunroof model
$1,694.00Part Number
114 290 W13
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 8-Point, Front & Rear with Diagonal & Rear Bar, 2 Passenger, Around Dash-Type
- For Sunroof model only
$1,134.00Part Number
220 270 GS20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 12-Point, Front & Rear with Diagonal, Side, Rear Side & Rear Bars, 5 Passenger, Around Dash-Type
- For Non-Sunroof model only
$1,560.00Part Number
658 270 WB12
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 12-Point, Front & Rear with Diagonal, Side, Rear Side & Rear Bars, 2 Passenger, Around Dash-Type
- 2-Door, Non-Sunroof model, Model E.F.G
$1,560.00Part Number
671 270 W12
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 6-Point, Front & Rear, 2 Passenger, Dash Through-Type
- For Non-Sunroof model only
$867.00Part Number
322 290 E20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 7-Point, Front & Rear with Diagonal Bar, 2 Passenger, Dash Through-Type
- For Non-Sunroof model only
$1,000.00Part Number
163 290 F20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 6-Point, Front & Rear, 4/5 Passenger, Dash Through-Type
- For Sunroof model only
$867.00Part Number
153 290 BS20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 6-Point, Front & Rear, 4/5 Passenger, Around Dash-Type
- For Non-Sunroof model only
$867.00Part Number
320 270 B20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 6-Point, Front & Rear, 4/5 Passenger, Around Dash-Type
- For Non-Sunroof model only.
- WRX STi 4-Dr. Sedan model, EJ25T
$867.00Part Number
6A1 270 B20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 8-Point, Front & Rear with Diagonal & Rear Bar, 2 Passenger, Dash Through-Type
- FA20 (2.0L) All model
$1,134.00Part Number
965 290 G20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 12-Point, Front & Rear with Diagonal, Side, Rear Side & Rear Bars, 2 Passenger, Dash Through-Type
- 4-Door , Non Sunroof model
$1,560.00Part Number
660 290 W12
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 8-Point, Front & Rear with Diagonal & Rear Bar, 2 Passenger, Around Dash-Type
- For Non-Sunroof model only
$1,134.00Part Number
566 270 G20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 6-Point, Front & Rear, 4/5 Passenger, Around Dash-Type
- For Non-Sunroof model only.
- WRX 4-Dr. Sedan model, FA20T
$867.00Part Number
6A1 270 B20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 6-Point, Front & Rear, 2 Passenger, Around Dash-Type
- For Non-Sunroof model only
$867.00Part Number
313 270 E20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 8-Point, Front & Rear with Diagonal & Rear Bar, 2 Passenger, Around Dash-Type
- For Non-Sunroof model only
$1,134.00Part Number
420 270 G20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 13-Point, Front & Rear with Diagonal, Side, Center Floor, Rear Side & Rear Bars, 2 Passenger, Dash Through-Type
- For Non-Sunroof models, Applied A-G, and spec C
$1,694.00Part Number
666 290 W13
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 6-Point, Front & Rear, 2 Passenger, Around Dash-Type
- For Non-Sunroof model only
$867.00Part Number
311 270 E20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 6-Point, Front & Rear, 4/5 Passenger, Around Dash-Type
- 1NZ-FE (1.5L)
$867.00Part Number
901 270 B20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 6-Point, Front & Rear, 4/5 Passenger, Dash Through-Type
- For Non-Sunroof model only.
- WRX, EJ/20/25T
$867.00Part Number
692 290 B20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 10-Point, Front & Rear with Diagonal, Side & Rear Bars, 2 Passenger, Around Dash-Type
- For Non-Sunroof models, Applied A-G, and spec C
$1,294.00Part Number
666 270 W10
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 8-Point, Front & Rear with Diagonal & Rear Bar, 2 Passenger, Around Dash-Type
- 2/3 Door, Non-Sunroof model
$1,134.00Part Number
116 270 G20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 7-Point, Front & Rear with Diagonal Bar, 4/5 Passenger, Around Dash-Type
- For Non-Sunroof model only
$1,000.00Part Number
560 270 L20
Position: -$534.00Part Number
901 270 C20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 13-Point, Front & Rear with Diagonal, Side, Center Floor, Rear Side & Rear Bars, 2 Passenger, Around Dash-Type
- For Non-Sunroof model only
$1,694.00Part Number
508 270 W13
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 6-Point, Front & Rear, 4/5 Passenger, Dash Through-Type
- For Non-Sunroof model only
$867.00Part Number
560 290 B20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 12-Point, Front & Rear with Diagonal, Side, Rear Side & Rear Bars, 2 Passenger, Around Dash-Type
- For Non-Sunroof model only
$1,560.00Part Number
185 270 W12
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 4-Point, Rear, 2 Passenger
- For Non-Sunroof model only
$534.00Part Number
681 270 C20
Position: -SAFETY 21 Roll cage
- Steel 40mm OD, Black Paint
- 5-Point, Rear, 2 Passenger with Diagonal Bar
- Coupe
$667.00Part Number
251 270 D20
Position: - -
Body Underguard System
- Mud Scraper for rear brake caliper, Rally use only
- All models (Applied A-G)
$707.00Part Number
667 201 MDS
Position: -Body Underguard System
- Body Under Floor Guard - Duralumin 17S Material, t=2mm
- For Rally & Race use
- FA20 (2.0L) All model
$494.00Part Number
965 214 A
Position: -License Plate Relocation Offset Plate
- Universal-Type 3-ways Height Adjustable Plate. Aluminum. Blue Anodized.
- Low-Mid-High. (higher position than OE). JDM Spec. For US model, need to drill holes on plate to fit to US license plate.
$54.00Part Number
00B 550 AL
Position: FrontMud Flaps
- Mounts on outside of fender.
- Needs to drill holes on outer fender panels & inner tire housing on each side.
- For Non-Factory Body Kit models only
$200.00Part Number
560 840 FAR
Position: FrontOther Parts
- Rear Window Air Ventilation Panes Set
- Add-on Type for Competition use
- MT, with AYC, 4G63T
$307.00Part Number
565 828 A
Position: Rear$240.00Part Number
965 823 CM
Position: -$131.00Part Number
693 017 F
Position: Front -
High Performance Clutch Components
- Reinforced clutch cover
- Clamp Load: 10300N-m
- Release Bearing available P/N 660 BRG602 $96.00.
- 4G63T
$486.00Part Number
00C 022 B560
Position: EngineHigh Performance Clutch Components
- Copper clutch set
- Copper clutch disk & reinforced clutch cover
- 1NZ-FE (1.5L)
$540.00Part Number
122 022 F
Position: -High Performance Clutch Components
- Copper clutch set
- Copper clutch disk & reinforced clutch cover
- L15A, 5MT, 6MT
$682.00Part Number
386 022 F
Position: -High Performance Clutch Components
- Copper clutch set
- Copper clutch disk & reinforced clutch cover
- K20A (2.0L)
$707.00Part Number
322 022 F
Position: -High Performance Clutch Components
- Metal clutch disc
- 225mm OD, Spline 25.6mm OD, # of teeth 24
- L20/L24
$347.00Part Number
00C 022 C202N
Position: -$372.00Part Number
00C 022 C438Z
Position: -High Performance Clutch Components
- Metal clutch set ***6-Speed MT only***
- Metal disc & reinforce clutch cover
- 2WD 1500cc.
$695.00Part Number
386 022 G
Position: -High Performance Clutch Components
- Metal clutch set
- Metal disc & reinforce clutch cover
- Applied A must use the release bearing 660 brg602 \7,560
- EJ20T (Applied A, B & C model)
$835.00Part Number
660 022 G
Position: -High Performance Clutch Components
- Thin metal clutch set
- Thin Metal clutch disc & clutch cover
- 2WD 1600cc/B16A
$771.00Part Number
317 022 H
Position: -High Performance Clutch Components
- Metal clutch disc
- OD 215mm OD, Spline 24.1, # of teeth 21
- 4A-GE/5A-F(H)E
$372.00Part Number
00C 022 C205T
Position: -High Performance Clutch Components
- Thin metal clutch disc
- OD 200mm OD, Spline 24.3, # of teeth 22
- B6
$358.00Part Number
404 022 C
Position: -High Performance Clutch Components
- Copper clutch set
- Copper clutch disk & reinforced clutch cover
- SR20DET
$771.00Part Number
221 022 F
Position: -High Performance Clutch Components
- Clutch cover for thin metal
- Clamp Load: 10300N-m
- Release Bearing available P/N 660 BRG602 $96.00.
- EJ20T, Applied F&G is not suitable.
$500.00Part Number
660 022 B
Position: Engine$428.00Part Number
322 022 C
Position: -LSD Hybrid Diff
- 1 way (Initial set-up)
- AT, OEM Diff : OPEN, 2JZ-GE (3.0L), 1UZ-FE (V8 4.0L), 3UZ-FE (V8 4.3L)
$1,520.00Part Number
HBD 167 A
Position: Rear$1,520.00Part Number
HBD 253 A
Position: Rear$1,254.00Part Number
LSD 124 B15
Position: Front$1,520.00Part Number
LSD 684 K2
Position: Rear$1,347.00Part Number
LSD 182 A
Position: RearLSD Type-MZ
- 2 way (1.5 & 2 way)
- The car with the VISCOUS LSD, the side flange must be changed
- MT.OEM Diff : MECHANICAL Type, 4G63T
$1,374.00Part Number
LSD 141 K2
Position: Rear$1,347.00Part Number
LSD 183 A2
Position: RearLSD Type-MZ
- 2 way (1 & 2 way)
- Competition (higher initial torque) Type available on request
- MT, OEM Diff : MECHANICAL Type/non-AYC, 4G63T
$1,374.00Part Number
LSD 141 A2
Position: Rear$1,320.00Part Number
LSD 181 K15
Position: RearLSD Type-MZ
- 2 way (1 & 2 way)
- Competition (higher initial torque) Type available on request
- Sti Ver.1/2 WRX-RA (Center DCCD), MT, OEM Diff : Viscous/MECNANICAL Type, EJ20T
$1,320.00Part Number
LSD 181 A2
Position: Rear$1,320.00Part Number
LSD 177 E
Position: RearLSD Type-MZ
- 2.0 Way, Spec-F (45/45)
- Use with Final Gear set 4.875 & 5.125 ratio as set
- FA20 (2.0L) All model
$1,507.00Part Number
LSD 987 ET2
Position: Rear$1,374.00Part Number
LSD 141 K15
Position: RearLSD Type-MZ
- 1.5 way (1.5 & 2 way)
- Require to use with Nissan Genuine Side Shafts P/N 38220-40-F00/F01 each
- MT/AT, OPEN Diff, SR20DE, with HICAS model [R200]
$1,507.00Part Number
LSD 162 K15
Position: RearLSD Type-MZ
- 1.5 way (1 & 1.5 way)
- Soft VISCOUS Type for Gymkhana use. Use Mitsubishi OE P/N MD746743 & MD728354 to install.
- MT, without ACD, 4G63T
$4,360.00Part Number
LSD 447 BV115
Position: Front$1,840.00Part Number
LSD 133 A2
Position: RearLSD Type-MZ
- 1 way (1 & 2 way)
- Comes with speed meter driven gear. Cannot be used for OE Viscous LSD equipped vehicle
- MT, OEM Diff : OPEN/HELICAL, B18C
$1,454.00Part Number
LSD 328 A
Position: FrontLSD Type-MZ
- 1.5 way (1 & 1.5 way)
- Cannot be used for OE Viscous LSD equipped vehicle
- MT, OEM Diff : OPEN, H22A
$1,267.00Part Number
LSD 175 B15
Position: Front$1,574.00Part Number
LSD 251 K2
Position: RearLSD Type-MZ
- 2 way (1.5 & 2 way)
- For Torsen OE LSD Type-MZ
- AT, OEM Diff : TORQUE SENSING, 1UZ-FE
$1,574.00Part Number
LSD 168 K2
Position: Rear$1,654.00Part Number
LSD 471 F
Position: FrontLSD Type-RS
- 2 way (1.5 & 2 way)
- 5MT, OEM Diff : Viscous, EJ20T, not apply for the car with the VDC(traction control)
$1,400.00Part Number
LSD 183 L2
Position: Rear$1,520.00Part Number
LSD 453 F
Position: Front$1,547.00Part Number
LSD 684 L2
Position: Rear$1,400.00Part Number
LSD 180 C
Position: Front$1,467.00Part Number
LSD 150 L2
Position: Rear$1,520.00Part Number
LSD 162 L15
Position: RearLSD Type-RS
- 2 way (1 & 2 way)
- 5MT, OEM Diff : Viscous, EJ20T, not apply for the car with the VDC(traction control)
$1,400.00Part Number
LSD 183 F2
Position: RearLSD Type-RS
- 1 way only: Use for Competition (Gymkhana), 55/0 deg.
- Center DCCD, 6MT, OEM Diff : MECHANICAL Type, EJ20T
$1,400.00Part Number
LSD 182 FG
Position: RearLSD Type-RS
- Pro-Adjust (Initial Set-up 1-way 55/0)
- Fully Adjustable Ramp Angle Settings by using optional cam chip set
- FA20 (2.0L) All model
$2,014.00Part Number
LSD 986 R
Position: RearLSD Type-RS
- 1 way (1 & 1.5way)
- Require to exchange original side shafts to Nissan Genuine P/N 38415AA100 x2 pcs. & Snap-Ring P/N 805028011 x 2pcs. for the car with OE HELICAL LSD after Jan 1998 production models
- Sti Ver.4 WRX-RA Applied E (Center DCCD), MT, OEM Diff : OPEN/HELICAL, EJ20T
$1,400.00Part Number
LSD 180 C
Position: Front$1,520.00Part Number
LSD 565 L2
Position: Rear$1,400.00Part Number
LSD 184 C
Position: Front$1,520.00Part Number
LSD 802 F
Position: Front$1,320.00Part Number
LSD 135 L15
Position: Rear$1,374.00Part Number
LSD 309 C
Position: Front$1,600.00Part Number
LSD 252 F
Position: RearLSD Type-RS
- 1 way (1 & 1.5way)
- Comes with speed meter driven gear. To use this LSD for OE Viscous LSD equipped vehicle, requires to replace ring gear and bolts.
- MT, OEM Diff : OPEN, B16A
$1,507.00Part Number
LSD 318 C
Position: Front$1,600.00Part Number
LSD 168 F
Position: Rear$1,400.00Part Number
LSD 183 F
Position: Rear$1,520.00Part Number
LSD 453 F
Position: RearLSD Type-RS
- 2 way (1.5 & 2 way)
- MT, OEM Diff : OPEN, 4A-GE, Kouki (after Chassis #0193815-/5066286-)
$1,320.00Part Number
LSD 131 L2
Position: RearLSD Type-RS
- 2 way (1 & 2 way)
- Comes with side bearing
- MT, with AYC, not apply for the car with renewed diff, 4G63T
$1,507.00Part Number
LSD 148 F2
Position: Rear$1,587.00Part Number
LSD 153 F
Position: Rear$1,520.00Part Number
LSD 986 L15SP
Position: Rear$1,600.00Part Number
LSD 253 F2
Position: RearLSD Type-RS
- 1 way (1 & 2 way)
- Require to exchange original side shafts to Nissan Genuine P/N 38415AA100 x2 pcs. & Snap-Ring P/N 805028011 x 2pcs. for the car with OE HELICAL LSD after Jan 1998 production models
- Applied A-G (Center Viscous), MT, OEM Diff : OPEN/HELICAL, EJ20T
$1,400.00Part Number
LSD 180 F
Position: FrontLSD Type-RS
- 1 way (1 & 2 way)
- Comes with speed meter driven gear & ring gear bolts. To use this LSD for OE Viscous LSD equipped vehicle, requires to replace ring gear and side shafts.
- MT, OEM Diff : OPEN, 4G63T
$1,454.00Part Number
LSD 134 F
Position: FrontLSD Type-RS
- 1.5 way (1.5 & 2 way)
- With side bearing, differential case gasket. Side shaft flange:teeth 29, crown gear bolt diameter:12?
- MT/AT, OEM Diff : Viscous LSD, CA18DE, CA18DET, KA24E/DE [R200]
$1,520.00Part Number
LSD 264 L15B
Position: RearLSD Type-RS
- 1 way only: Use for Competition (Gymkhana), 45/0 deg.
- Comes with speed meter driven gear. To use this LSD for OE Viscous LSD equipped vehicle, requires to replace ring gear and bolts.
- MT, OEM Diff : OPEN, B16A
$1,507.00Part Number
LSD 318 FG
Position: FrontLSD Type-RS
- 1 way only: Use for Competition (Rally), 45/0 deg.
- The car with the VOSCOUS LSD, the side flange must be change
- MT.OEM Diff : MECHANICAL Type, 4G63T
$1,400.00Part Number
LSD 141 FR
Position: RearLSD Type-RS Spec-F
- 2 way (1 & 2 way)
- AT, OEM Diff : OPEN, 2JZ-GE (3.0L), 1UZ-FE (V8 4.0L), 3UZ-FE (V8 4.3L)
$1,600.00Part Number
LSD 167 FT2
Position: Rear$2,014.00Part Number
LSD 985 FT2
Position: Rear$654.00Part Number
308 023 A
Position: -$654.00Part Number
660 023 A
Position: -Single Plate Clutch System
- Push Type clutch system
- Comes with Release Bearing. Clamp Load: 12550N-m
- 4G63T
$1,640.00Part Number
510 022 SP
Position: -Transmission Gear Set
- DOG Mission Conversion Kit, 1st - 5th, Stage-2
- Use OE Final Gear, Can be used for 6-Speed Transmission Case
- FIA Approved: N-5621, N-5650, N-5656, N-5676, N5695, N-5741, N-5732, N-5738
- WRX STi 4-Dr. Sedan model, EJ/20/25T
$9,734.00Part Number
667 028 A2
Position: - -
$227.00Part Number
560 464 HV
Position: Rear$187.00Part Number
116 C933 A
Position: RearBushing Kit
- Lower Arm Bushings / Pillowball Type
- Front-Side
- Come with Dust Rubber Boots
- 2WD 1600cc/B16A
$227.00Part Number
315 464 BV
Position: FrontBushing Kit
- Lower Arm Bushings / Pillowball Type
- Rear right Side
- Come with Dust Rubber Boots
- 2WD 1600cc/B16A
$200.00Part Number
311 464 NRV
Position: Front$560.00Part Number
965 464 AV
Position: FrontBushing Kit
- Rear Upper Arm Bushings / Pillowball Type
- For Front Upper Arm (Requires 2 sets (4 pcs. Total) per vehicle)
- Come with Dust Rubber Boots
- RWD 2000cc.
$307.00Part Number
429 464 KV
Position: FrontOther Parts
- Adjustable Sway Bar Bracket Kit
- 3-ways Adjustable, Cannot be used with OE Sway bar
- AWD 2000cc.T
$64.00Part Number
560 315 A
Position: -Pillowball Upper Mounts
- Fixed Type
- Can be used with ID60mm coilover straight type springs
- Comes with Pillow Nut: H (M12x1.25mm, Depth 5mm), Collar:06
- 2WD 2000cc 2000ccT, 1G-GTE
$320.00Part Number
183 421 A60
Position: RearPillowball Upper Mounts
- Fixed Type
- Can be used with ID65mm coilover straight type springs
- Comes with Collar:37 & 07
- -
$320.00Part Number
508 421 A65
Position: RearPillowball Upper Mounts
- Fixed Type
- Can be used with ID65mm coilover straight type springs
- Comes with Pillow Nut: B (M14x1.5mm), Collar:03
- -
$320.00Part Number
137 421 A65
Position: RearPillowball Upper Mounts
- Fixed Type
- Can be used with ID60mm coilover straight type springs
- Comes with Collar:33 & 34
- -
$320.00Part Number
420 421 A60
Position: RearPillowball Upper Mounts
- Camber Adjustable Type
- Can be used with OE spring
- Comes with Pillow Nut A (M14x1.5mm, Depth 5mm), Collar:35
- -
$320.00Part Number
419 410 A
Position: FrontPillowball Upper Mounts
- Fixed Type
- Can be used with both OE spring & ID70mm coilover straight Type springs
- Comes with Collar:37 & 07
- -
$320.00Part Number
508 421 S
Position: RearPillowball Upper Mounts
- Camber Adjustable Type
- Can be used with coilover straight Type spring only. Require to order upper spring seat separately. +10mm raised.
- Comes with Pillow Nut: H (M12x1.25mm, Depth 5mm), Collar: 10
- -
$320.00Part Number
213 410 A
Position: FrontRods, Arms, Links
- Negative Camber - Upper Arm Assy with Pillow Ball Ends
- 0mm Same Arm Length as OE Arm
$427.00Part Number
231 479 AB
Position: FrontRods, Arms, Links
- Rear Lateral GT Link (front side), Pillowball & HD Rubber
- Applied A-D models only
$254.00Part Number
666 484 LA
Position: Front$334.00Part Number
900 311 B16
Position: Rear$334.00Part Number
560 311 BJ23
Position: RearSway Bar
- 21mm 133% compare to standard
- With Bushings, some of model are using standard model
- AWD 2000cc.T
$240.00Part Number
660 311 A21
Position: Front$347.00Part Number
3A2 311 A28
Position: Front$334.00Part Number
271 311 B16
Position: RearSway Bar
- 21mm2-ways Adjustable 173/199% compare to standard
- With Bushings
- 2WD 2000cc Early Model only
$267.00Part Number
457 311 AJ21
Position: Front$94.00Part Number
660 318 A
Position: FrontSway Bar End Link
- Sway Bar Linkage - Front
- Fixed length. Non-Adjustable
- turbo model, applied A-D
$74.00Part Number
667 318 A
Position: Front -
Lower Arm Bar
- Lower Arm Bar - Ver.2
- Remove OE part. Can be used with CUSCO Lower Arm Ver.1 as set.
- AWD 2000ccT
$200.00Part Number
564 477 A
Position: Front$174.00Part Number
687 492 RS
Position: Rear$314.00Part Number
6A1 492 M
Position: Front$280.00Part Number
692 492 FM
Position: Front -
$114.00Part Number
361 561 A
Position: Front$114.00Part Number
307 561 A
Position: FrontStrut Tower Mount Bracket w/BCS
- For RHD model only. Can be used with Type-OS Bar only. Blue
- 2WD 2000cc, 2000ccT
$80.00Part Number
222 54B AL
Position: FrontStrut Tower Mount Bracket w/BCS
- For RHD model only. Can be used with 40mm OD Bar. Type-ALC40, Type-40, Type-40D, Type-CB. Titanium color
- AWD 2000ccT
$80.00Part Number
565 54B AT
Position: Front$240.00Part Number
195 526 A
Position: Rear$200.00Part Number
222 570 A
Position: FrontType AS
- Aluminum/20mm OD, Round
- Require to modify engine hood to install
- 2WD 1600cc, SC model is not suitable
$160.00Part Number
135 511 A
Position: Rear$200.00Part Number
157 541 A
Position: Rear$200.00Part Number
164 541 A
Position: Rear$200.00Part Number
692 540 A
Position: FrontType OS
- Aluminum, Oval Shape Bar
- Require to trim rear panels to install
- For Applied C-D models
$200.00Part Number
666 541 A
Position: RearType ST
- Solid Steel/Round with Center Turn Buckle Tension Adjustable
- 2WD 2000cc, NA model. For ESC less model, carburetor model is not suitable
$160.00Part Number
520 510 A
Position: Front -
$12.00Part Number
A160 RM002B
Position: Rear$12.00Part Number
A160 RM001
Position: Rear$51.00Part Number
965 005 R01
Position: -$34.00Part Number
00B 050 B13
Position: EngineOil Catch Tank
- Street Oil Catch Tank Kit
- 0.6L, 15mm Hose
- Non-ABS model only
- 2WD 2000cc 2000ccT, 1G-GTE
$131.00Part Number
183 009 A
Position: Engine$131.00Part Number
307 009 A
Position: EngineOil Filter
- 65mm OD x 65mm H, 3/4-16UNF for Toyota, Suzuki, Daihatsu
- High Magnetic Force to collect metals
$34.00Part Number
00B 001 B
Position: Engine$80.00Part Number
00B 700 A234
Position: EngineOptional / Replacement Parts
- Pressure Ring & Cross Shaft Set for CUSCO LSD, Replacement
- D-size (FF1600): 1-way (45/0) & 1.5-way (55/20)
$427.00Part Number
LSD 032 PPJ
Position: -Optional / Replacement Parts
- Overhaul Kit, D-size (FF1600)
- t=1.3mm Outer x6, t=1.2mm Outer x3, t=1.8mm Inner x6, t=1.8mm Cone Spring x2, t=2.0mm Cone Spring x2
$227.00Part Number
LSD 001 02
Position: -Optional / Replacement Parts
- Overhaul Kit, D-size (FF1600)
- t=1.2mm Outer x1, t=1.3mm Outer x4, t=1.4mm Outer x1, t=1.8mm Inner x4, t=1.8mm Cone Spring x2
$174.00Part Number
LSD 001 40
Position: -Optional / Replacement Parts
- LSD Friction Clutch Plate, Replacement
- t=2.1mm, D-size (FF1600), Inner Tab
$19.00Part Number
LSD 11P B21
Position: -$131.00Part Number
380 003 A
Position: EngineTurbo Heat Shield
- For 4G63T Engine. T=1.2mm Stainless Steel. Bolt-on.
- Kit comes with stainless bolts.
$160.00Part Number
565 046 A
Position: EngineTurbo Heat Shield
- For EJ20T. T=1.2mm Stainless Steel. Bolt-on.
- Kit comes with stainless bolts.
- Applied D - G models
$91.00Part Number
660 045 A
Position: EngineTurbo Intake Pipe
- Turbo Air Suction Pipe Kit
- For 4G63T. Includes Polished Aluminum Pipes (80mm ID), Hoses, Hose Bands, Funnel Shape Hope
- Can be used with OE Air Cleaner Box.
$400.00Part Number
564 033 A
Position: Engine -
Optional / Replacement Parts
- Threaded Coilover Sleeve
- Tube ID=50.8mm for Coil Spring ID 72.8-80mm, Thread Length=145mm, Steel
- -
$160.00Part Number
220 640 A
Position: -$70.00Part Number
00B CCS 2BL
Position: -
Results 1 to 200 of 8273 total
per page
List Grid
